Manual Climber

The Lampyris Manual Climber

is concepted especially for small TV studios and photo studios. It provides an inexpensive and fl exible way of lighting. The load bar is used to hold 3 or 4 luminaires. The max. payload is 30 kg. Suspension cables are 4 zinc steel wires with a diameter of 2.3 mm. The precise maintenancefree worm gear is self-locking and reduced in two stages, thus enables rapid movement of the pantograph. The automatic stop in the drum is maintenance free and allows the individual limit of the maximum extension. A special End-of-roll safeguarding prevents the complete unwinding of the tightrope. thus remain two winding turns of rope on the drum at any time, required for safety. The hoist is prepared for pole operated use. The luminaires are attached with moveable DIN TV Sockets for fl exible positioning along the load bar. Ceiling-mounted fl exibly on pipe clamp or T-rail.

Type

CMG-030

CMG-050

Installation length (mm)

 480

480

Extension max. (mm)

3000

 5000

Suspension element

4x steel cable

4x steel cable

Load attachment

3x 17/29 mm DIN TV Socket

3x 17/29 mm DIN TV Socket

Payload max. (kg)

30

30

Gear box

self-locking drive

self-locking drive

Net weight (kg)

ca. 30

ca. 35

Power cable diameter

3x 2.5 qmm

3x 2.5 qmm

Power connector at the top

Schuko

Schuko

Power connector at the bottom

Schuko

Schuko

Order code

1002200

1002250